CONTROLLER SPECIFICATIONS AND REQUIREMENTS
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 4050/4090 NPS
5-7
Controller hardware specifications and requirements summary
The following table summarizes the specifications and electrical
requirements of your DocuPrint NPS printer controller hardware
components.
For a summary of printer hardware specifications and requirements,
refer to the “Printer specifications and requirements” chapter of this
guide. Contact your service representative if you have questions not
specifically addressed in this guide.
Table 5-4.
Printer controller specifications and power
requirements
Device
Dimensions (depth,
width, height)
Weight
Heat
dissipation
Power requirements
Cable lengths
Processor
d
=16.1 / 40.9 cm
w
=16.4 / 41.7 cm
h
= 3 in. / 7.6 cm
27 lbs. /
12.7 kgs
1,100 BTU
per hours
Sun Ultra 2 (60 Hz):
100 to 240 VAC,
15 amp, 0.4 KVA,
5-15 NEMA
Sun Ultra 2 (50 Hz):
100 to 240 VAC,
15 amp, 0.4 KVA
Sun Ultra 60 (60 Hz):
100 to 240 VAC,
15 amp, 0.4 KVA,
5-15 NEMA
Sun Ultra 60 (50 Hz):
100 to 240 VAC,
15 amp, 0.4 KVA
Power:
8 ft. /
2.4 m
Interface to
printer:
20 ft. / 6.1 m
usable length
Monitor
d
=6.1 / 41cm
w
=18.1 / 46 cm
h
=17.7 in. / 45 cm
61 lbs. /
27.7 kg
408 BTU
per hour
100-120 ~ VAC, 1
phase, 50-60 Hz,
3.0A, 0.4 KVA
200-240 ~ VAC, 1
phase, 50-60 Hz, 2.0A,
0.4 KVA
Video cable to
processor:
46 in. / 1.17 m
4 mm cartridge
tape drive
d
=12.2 in. / 31 cm
w
=7.5 in. / 19 cm
h
=2.8 in. / 7 cm
8 lbs. /
6.6 kg
---
100-120/200-240 VAC,
0.8/0.4A, 47-63 Hz
SCSI cable to
processor or
additional SCSI
device:
28 in. / 71 cm
Keyboard
d
=7.5 in. / 17.8 cm
w
=18 in. / 45.7 cm
2 lbs. / 1kg
---
---
72 in. / 1.8 m
Mouse
d
=3 in. / 8 cm
w
=4 / 10 cm
h
=2 in. / 5 cm
0.3 lbs. /
0.14 kg
---
---
25 in. / 63 cm