Xerox 3450B - Phaser B/W Laser Printer, Service Manual, Page: 78 / 180

General Troubleshooting 4-11
Jam At Exit (Jam 2)
Paper jams in the Fuser Assembly outlet or the Exit Roller Assembly.
Troubleshooting References
Procedure
Applicable Parts Wiring and Plug/Jack Map References
Exit Sensor Actuator
Fuser Assembly
Exit Transport Assembly
Main Board
Step Action and Questions Yes No
1
Is the Exit Sensor Actuator damaged or binding? Repair or
replace the
actuator and/or
sensor.
Go to Step 2.
2
Inspect the Exit Roller Assembly. Is it damaged
or binding?
Replace the Exit
Roller
Assembly.
Go to Step 3.
3
Inspect the Fuser. Is any paper wrapped around
the Fuser rollers?
Remove
obstruction and
clean Fuser
rollers.
Go to Step 4.
4
Is the Fuser Assembly operational (rotates when
the Fuser motor is on)?
Go to Step 5. Replace the
Fuser
Assembly.
5
Use the embedded diagnostics to check the
Fuser Exit Sensor. Is the sensor operational?
Replace Main
Board.
Replace Fuser
Exit Sensor.