34
S
ETTINGS
Resetting the base (terminal)
When you reset your base, all the base
parameters are reset to their initial values
(factory settings).
On the navigator key
, press or
until the
SETTINGS
screen is displayed,
press
OK
to confirm.
Select
ADVANCED SET.
. Press
Valid.
.
Select
SET BASE
. Press
Valid.
.
Select
RESET BASE
using or . Press
Valid.
.
A confirmation screen will prompt you to
confirm your request:
•
To reset the base, press
Yes
.
•
If you do not wish to reset the base,
press
No
.
Enter the base code. Press
Valid.
. The
RE-INIT. IN PROCESS
message is
displayed on the screen.
To exit the menu, press the red key
.
De-registering a handset
This function enables you to de-register a
handset from your base. This may be
necessary if you have lost a handset or if you
already have 6 handsets registered to the
same base.
When resetting the base, the base
code becomes 0000 again.
On the navigator key
, press or
until the
SETTINGS
screen is displayed,
press
OK
to confirm.
Select
ADVANCED SET.
. Press
Valid.
.
Select
SET BASE
. Press
Valid.
.
Select
DELETE HANDSET
using or .
Press
Valid.
.
Select the handset you wish to unregister in
the list by pressing or . Press
Valid.
.
A screen prompts you to confirm the
unregistration. Press
Yes
to unregister
the handset.
To exit the menu, press the red key
.
Renaming the base (terminal)
On the navigator key
, press or
until the
SETTINGS
screen is displayed,
press
OK
to confirm.
Select
ADVANCED SET.
. Press
Valid.
.
Select
SET BASE
. Press
Valid.
.
Select
RENAME BASE
using or . Press
Valid.
.
Select the base for which you want to modify
the name using or . Press
Valid.
.
Enter the new name using the keypad. Press
Valid.
.
To exit the menu, press the red key
.
