33
S
ETTINGS
During the registration process (up to
one minute), the LCD screen displays
HANDSET REGISTRATION
. The
message disappears once registration is
complete.
The new handset and the base are mutually
searching for each other. The registration
may take several seconds.
Once the handset is registered, the handset
automatically exits the registration mode and
lets you know the registration is done.
If the registration process fails (for
example, the handset left the
registration mode too soon), the
machine emits a 3-beep signal. In
this case, repeat the procedure from
step 1.
You can also set your base to the
registration mode using a handset
already registered by selecting the
Registration function in the menu
SETTINGS/ADVENCED SET./SET
BASE.
B
ASE
SETTINGS
(
TERMINAL
)
Using a handset to put the base
in registration mode
This function enables you to put the base in
registration mode so you can register a new
handset. To do so, the handset to be
registered must be in registration mode (refer
to paragraph
Registering a new handset to
a terminal
, page
30
).
On the navigator key
, press or
until the
SETTINGS
screen is displayed,
press
OK
to confirm.
Select
ADVANCED SET.
using or .
Press
Valid.
.
Select
SET BASE
using or . Press
Valid.
.
Select
REGISTR. MODE
using or .
Press
Valid.
.
A screen prompts you to confirm the setting
of the base to the registration mode. Press
Yes
to enter the registration mode. The
indicator light on your base starts to quickly
blink green.
Your base will remain in registration mode for
about 1 minute.
