Page 9
TO
ENTER
SNMP
COMMUNITY
NAMES
1.
In the SNMP Community Names window, enter names for Read Community and Write
Community, and click OK.
2.
If you enter names that are invalid, the Accessing WebSetup window appears.
Do not modify Internet Explorer security settings as indicated in the online instructions.
Instead, click OK to close the Accessing WebSetup window. Then enter valid names in the
SNMP Community Names window, and click OK. You can download the updates onto
your computer and then to the Fiery EX2101 Printer Controller using Command
WorkStation or Fiery Downloader.
Bindery Setup
In the list of available servers in Bindery Setup, the scroll bar on the right side has an up
arrow but no down arrow.
Non-localized Strings
In Dutch, two messages are not translated in the SNMP Community Names login window.
Printer Status: Trays
The Printer Status tab does not display the paper levels of Tray 5 and Tray 7 when paper is
loaded in those trays.
Problem Feeding Paper from Tray 7 with Mixed Media
Depending on the marketplace, Tray 7 is set up either for 8.5
x
11 SEF (in the US) or A4
SEF (in Europe). If your copier is set up the opposite way, an error message appears in the
Mixed Media dialog box, and the job does not print.
Scale to Fit and Image Shift
If you print a document with size specified and the print options Scale to Fit and Image
Shift on, the image appears truncated.
Error Messages Truncated
Command WorkStation, Fiery EX2101 Printer Controller control panel, and Fiery Bar
error messages may appear truncated.
Powering on/off the Fiery EX2101 Printer Controller
Occasionally, when you power off and then power on the Fiery EX2101 Printer Controller,
the network connection settings may be lost. To avoid this, when you turn the power switch
off, you must wait at least 10 seconds before turning the power switch back on.
System
