Page 11
Imposition and Center Staple
From DocBuilder Pro Imposition and Booklet Maker, an imposed document with a center
staple folds in the wrong direction. To fold and staple the job correctly, set the following
options in the order specified:
1.
Page Order = Reverse
2.
Folding = Half-Fold (outside)
3.
Stapler Mode = Center
4.
Duplex = Top-Top
Booklet Maker with Center Staple
Do not select reverse page order when you have selected Booklet Maker>Standard Booklet
and center staple.
Staple and Punch
Staple and punch are not supported on Index2, Heavyweight2, labels, and transparencies.
Duplex Top-Bottom with Dual Staple
It is possible to select duplex top-bottom with dual staple; however, doing so might produce
undesired results.
Missing Paper Sizes in Mac OS X
Some paper sizes are missing from the Mac OS X driver: A4 P is displayed as A4 A4,
8.5
x
14 is missing (use Legal instead), JB4 should be B4, JB5 should be B5 P, where P
stands for the long edge of the paper.
Document Default Page Size on Mac OS X
The document default page size on Mac OS X does not change from letter to A4 when you
change regional settings. To work around this, set the page size in the Print Center
Preferences window. To do this, open the Print Center, select Print Center>Preferences
from the menu bar, and select the desired default page size to be used for all documents.
Constraints Not Enforced in Mac OS X
In Mac OS X, you are allowed to choose illegal combinations, which may produce
unpredictable results. Later releases of Mac OS X may fix this problem.
Tri-Z or Tri-C
Do not print a duplex job with the Negative option and tri-folding. This may cause the
paper to jam.
When you are setting up a job for Tri-C or Tri-Z fold (8.5
x
11 or A4) or Z-fold (A3 and
11
x
17), select the SEF orientation in the Fiery Driver page size menu. Selecting LEF results
in a conflict.
Wrong Default Paper Size on Mac OS 9
The default page size for Mac OS 9 is letter instead of A4.
A6 Paper
A6 paper is not supported for the Fiery EX2101 Printer Controller.
