Xerox 2101, Configuration Manual

Page: 112 / 192

5
5-6 Setting up the Fiery EX2101 from a Windows Computer
Enable Printed Queue
—Specify whether to enable the Printed Queue, a storage
location on the Fiery EX2101 hard disk for recently printed jobs. You can reprint jobs
from the Printed queue without resending them to the Fiery EX2101. If the Printed
queue is not enabled, jobs are deleted from the Fiery EX2101 hard disk immediately
after they are
printed.
Jobs Saved in Printed Queue
—Specify the number of jobs to be stored in the Printed
queue. Jobs in the Printed queue take up space on the Fiery EX2101 hard disk.
Use Character Set
—Specify whether the Control Panel and the job management tools
should use the Macintosh, DOS, or Windows character set for displaying file names.
This is important if a file name includes accented or composite characters (such as
é or æ). For mixed-platform networks, select the setting that gives the best overall
representation of the special characters you use.
Print Start Page
—Specify whether the Fiery EX2101 should print a start page when it
is turned on or restarted. The Start Page displays information about the Fiery EX2101,
including server name, current date and time, amount of memory installed, network
protocols enabled, and print connections published.
Enable Previews
—Specify whether a preview thumbnail should be displayed in the
Command WorkStation when a job is being processed. If you select Yes, the preview
thumbnail is displayed in the Processing section of the Activity Monitor.
Enable Printing Groups
—Specify whether to enable printer groups for Member
Printing. If you are downloading fonts, set this option No. If you enable this option,
you must use Command WorkStation to define user groups and passwords. Users must
then enter their group name and password when they print.
Support
—Enter names, phone numbers, and e-mail addresses of contact people at
your organization who provide support for the Fiery EX2101 and the copier. In
remote Setup, use the Support tab.
N
OTE
:
For password setup, see “Passwords from local Setup or remote Setup” on
page 7-4.