Service Guide
xi
Removing the entrance sensor board 113
Removing the high voltage power supply 115
Removing the low voltage power supply 116
Removing the control panel 117
Removing the feed roller and nudger roller 118
Removing the retard pad 119
Removing the paper size sensing board 121
Removing the paper size sensing actuator 122
Removing the main feeder assembly 124
Removing the lower plate assembly 125
Removing the paper tray lift arm roller 126
Removing the multi-sheet bypass feeder 128
Removing the multi-sheet bypass feeder entrance sensor actuator 129
Removing the tray 1 entrance sensor actuator 130
Removing the belt entrance sensor actuator 131
Removing the transfer belt unit 132
Removing the registration clutch 133
Removing the registration motor assembly 134
Removing the registration roller assembly A and drive gear 136
Removing the registration roller assembly B 138
Removing the fuser unit 139
Fuser latching handle (left) 140
Removing the fuser latching handle (right) 141
Removing the fuser exit roller 143
Removing the exit sensor assembly 145
Removing the duplex guide assembly 147
Removing the eject guide assembly 148
Removing the LED Assembly power connector 149
Removing the stack full sensor 150
Removing the main motor assembly 152
Removing the main feeder drive motor 153
Removing the transfer belt motor assembly 155
Removing the shutter plate 156
Removing the color registration sensor assembly 157
Removing the color registration solenoid 158
Removing an LED assembly 159
Removing the drum contact assembly 160
Disconnecting the LED assembly power harness 161
Removing the toner sensor actuators 162
Removing the duplex unit 163
Removing the feeder control board cover 164
Removing the idler roller assembly 165
Removing the optional feeder inner frame bottom screws 166
