Xerox 100S10480 - DocuPrint P8E - Printer, User Manual, Page: 39 / 72

Printing • 27
2-4-3 Using the Tabs on the RCP
Tab Parameters Description
Total View
(Shows all
the printer
parameters
available in
the RCP.) (See individual
Printer, Page Setup,
Font Setup, Quality
and Test tabs, below) (See below)
Printer Emulation Shows current emulation. It is always PCL 5e.
Printer Timeout Tells the printer how long to wait after data is printed
before accepting data via the other interface. The
default value is 15 seconds.
Power Save Puts the printer into Power Save mode when it is
powered ON but is idle for a length of time. Select your
desired time length. The default value is 30 minutes. In
Power Save mode, the power consumption is under
18 watts.
Paper Jam Recovery If this box is checked, the printer will recover pages
from the print job when paper is jammed in the printer.
Page Setup Paper Size Sets the default size of the image that will print on
paper and envelope.
Lines Per Page Sets the number of lines on the page.
Copies Sets the number of copies.
Orientation Determines the orientation of the image on the page.
Font Setup Symbol Set Symbol set is a unique grouping of all available
characters in a font.
Pitch This menu is available only when you select a fixed
pitch outline font. It is ignored for other fonts.
Typeface It shows the typeface of the current font.
Point Size This menu is available only when you select a
proportionally spaced outline font. It is ignored for
other font.