Xeos Rover-X, User Manual

Page: 19 / 35

Rover-X User Manual Version 1.0 19
Default Timer Settings
Timer <T0> T1 T2 T3 T4 T5 T6 T7 Min-Max
GPS 3h 10m 5m 1d 5m n/a n/a n/a 30s-7d
SBD 3h 10m 10m 1d 10m n/a n/a n/a 30s-7d
TLT 2m 30s 2m 5m 2m n/a n/a n/a 5s-1d
Legend
GPS GPS position acquisition interval
SBD SBD (Iridium) transmission interval
TLT Tilt sensor check interval (if Tilt is enabled)
T0 – T7 Timer mode number
<T#> Timer currently in use
#s/m/h/d Interval in seconds/minutes/hours/days
Min Minimum allowed interval for this timer
Max Maximum allowed interval for this timer
Timers
Timer 0 Normal Used if no other modes are triggered
Timer 1 Start-up Used immediately after power-up or reset (one hour duration)
Timer 2 Inverted Used when the device is inverted
Timer 3 Low Battery Used when the device consistently detects low voltage according
to the set threshold
Timer 4 Watch
Circle Alarm Used when the device has exited its Watch Circle
•
The default timer settings of the Rover-X are suitable for most use cases.
•
Timers 5, 6 and 7 are not used in the Rover-X.