Resolute User Manual Version 2.5
42
Send the following commands to turn off GNSS and Radio respectively:
$gnsssetenabled f
$radiosetenabled f
On the top menu bar, navigate to Send File and click on Send Bootload Image.
The Firmware Image Send window will open and you will need to select the new version of
firmware by clicking the … and opening the .bin file. Once the Sent number matches the Size
number, the upload is complete.
Reset the unit by sending the following command and wait for the unit to restart.
$resetnow
Check the firmware version to confirm the installation was successful by entering the $ver
command and comparing it to the number on the .bin file that was uploaded:
