• Blow air through the 2 differential pressure sensor hoses (this will avoid damaging the sensor).
• Reconnect the sensor
• Delete any possible error codes.
5. DRIVING CYCLE
Drive the car for around 20 minutes to initiate a regeneration cycle. In order to initiate the regeneration cycle, drive at a
consistent speed at a medium to high RPM (>2.500). It's possible some heavy smoke to appear for a while from the exhaust,
due to the cleaning process still active in the DPF. This results in effective cleaning of the DPF.
If it is not possible to do a driving cycle, you can perform a static regeneration.
6. COATING (OPTIONAL)
• Connect the equipment electric clamps to the battery of the vehicle
• Connect the appropriate adapter to the vechicle
• Connect the adapter to the equipment DPF spiral hose (12).
• Introduce the DPF STEP 3 into the 4-WAY FLUX DPF tank.
• Start the vehicle’s engine and let it idle
• Press the Progam button (7) three times. “o” (optional treatment) will appear on screen. The treatment sequence will be launched
automatically.
• At the end of the sequence a signal sounds.
• Stop the vehicle’s engine.
•
Disconnect the adapter from the vehicle
• Blow air through the 2 differential pressure sensor hoses (this will avoid damaging the sensor).
• Reconnect the sensor
• Delete any possible error codes.
