Xentino SR2 Series, User Manual

Page: 64 / 67

SR2XX SERIES 2W/4W/8W G.SHDSL (BIS) EFM ROUTER UM V.0.7
– WWW.XENTINO.COM 64
User: root
Password: ****
Note: The default IP address is 192.168.0.1.
Main menu
When enter to prompt screen, you can input command ? to view the available top level menus of
each command set:
For example: type ? after the # , will display the current level of available command sets as below:
Dsl#?
config enter submenu system
status enter submenu status
show enter submenu information
utility enter submenu utility
reboot reboot system
quit logout
Dsl#
Top level Command set Description:
Command Description
config
Config parameters of router by entering submenu:
network
advance
mgmt
exit
status View the status of router.
show Show the system and configuration of router.
utility Upgrade software and backup and restore configuration.
reboot
Reset and boot system. After you have completed all necessary
setting, make sure to apply the new configuration to NVRAM and
reboot the system, otherwise, all of your changes will not take effect.
quit Quit system.