16
EN
‘Fault’ led flashes
continuously
.
Problem on the
output of the
inverter.
There is a short-circuit
or overload. Check the
consumers. When the
problem has been
resolved, the inverter
will restart automa-
tically.
A C C E S S O R I E S
M A I N T E N A N C E
To keep your inverter operating properly, there is very little
maintenance required. You should clean the exterior periodically
with a damp cloth to prevent accumulation of dust and dirt. Also
check periodically:
-
all wires and connections. Replace damaged wires immediately.
-
the ventilation vents
ATTENTION: turn off the inverter before you start the maintenance
activities!
PTS 230-20
Automatic switch between inverter and mains
or generator. See page 11.
Insulation monitoring device
Protection of persons according to the NEN 1010.
See page 12.
K01
Plug and play remote control with:
On/off switch, error display, load level en battery
level.