User Manual
Bobcat 320 Gated
Company confidential.
This document is the property of Xenics. It may not be reproduced – completely or partially – or passed to a third
party without written permission from Xenics.
Xenics nv
T +32 16 38 99 00
Doc Ref: ENG-2012-UMN016
Ambachtenlaan 44
F +32 16 38 99 01
Issue: 002
BE-3001 Leuven
Belgium
www.xenics.com
Date: 09/11/2012
XF-104_02/20-01-2012
Page 9 of 34
1. Introduction
1.1. Scope
This User Manual describes the technical specifications, interface description, dimensions,
image processing, basic and advanced parameters and related subjects for the following
camera:
Camera
Part number
Bobcat-1.7-320-Gated Scientific
XEN-000072
Table 1-1 Camera overview – Bobcat 320 Gated
Target group: This technical manual is written for professional users.
Please read this manual thoroughly before operating the camera!
1.2. Reference Documents
(1) Xeneth Installation Manual:
ENG-2012-UMN005-Rxxx_Xeneth-v2.4-Installation-Manual.docx
1.3. Manual Overview
This section provides a chapter overview:
•
Chapter 1 (this chapter) gives an overview of the conventions used in this manual
(styles and symbols), the safety warnings, conformity information about Xenics
cameras and the contact information.
•
Chapter
2
gives a mechanical (2D drawings) and electrical specification overview
•
Chapter
3
describes the optical interfaces
•
Chapter
4
describes the electrical interfaces
•
Chapter
5
describes the interface protocols
•
Chapter
6
provides the installation of the Xeneth and SDK software
•
Chapter
7
is a getting started list: it lists the steps to perform to be able to use the
camera
•
Chapter
8
describes the registers and commands.
i
