Xenics Bobcat 320 Gated, User Manual

Page: 31 / 34

User Manual
Bobcat 320 Gated
Company confidential.
This document is the property of Xenics. It may not be reproduced – completely or partially – or passed to a third
party without written permission from Xenics.
Xenics nv T +32 16 38 99 00 Doc Ref: ENG-2012-UMN016
Ambachtenlaan 44 F +32 16 38 99 01 Issue: 002
BE-3001 Leuven  Belgium www.xenics.com Date: 09/11/2012
XF-104_02/20-01-2012
Page 31 of 34
8.2.1. System Commands
Name Code Description
NUC 0x0001 Force a NUC operation
BeginUpdate 0x0002 Prevents the shutter from being operated until EndUpdate is called
EndUpdate 0x0003 See BeginUpdate
ClearCalib 0x0004 Clears the in memory calibration data
TriggerNow 0x0006 Force a software trigger
GetTrackRef 0x0020 Copies the track reference rectangle in cursor
SetTrackRef 0x0021 Copies the cursor rectangle to the reference rectangle
GetROI 0x0030 Copies the current region of interest to the cursor
SetROI 0x0031 Copies the cursor rectangle to the region of interest parameters
LoadDefault 0x0100 Load the camera default parameters
Load 1 0x0101 Load the user programmable slot 1
Load 2 0x0102 Load the user programmable slot 2
Load 3 0x0103 Load the user programmable slot 3
Load 4 0x0104 Load the user programmable slot 4
Store System 0x0200 Store system settings (Fixed IP address, user config slot names, boot slot)
Store 1 0x0201 Store to user programmable slot 1
Store 2 0x0202 Store to user programmable slot 2
Store 3 0x0203 Store to user programmable slot 3
Store 4 0x0204 Store to user programmable slot 4
Table 8-3 System commands