User Guide: XenData X2500-USB LTO-6 Archive System
8
2.4.4
Install the XenData6 W orkstation software as described below:
Select from the supplied USB memory stick or download the XenData6 Workstation
installation file.
Double click on the XD6Workstation_setup file to launch the installation wizard and
proceed as described below.
Carefully review the License Agreement and, if you agree, accept the terms of the
agreement.
If the computer you are using has not previously been licensed for XenData6 W orkstation
software. The following will be displayed.
Click
“Yes” and the License Administration Utility will launch.
When the License Administration Utility interface is displayed as shown below, select
“Enter License Activation Code” from the drop-down options. Then, enter your Activation
Code into the designated field and click
‘Apply’.
The License Administration Utility will connect to a XenData License Server and will
activate your system. It will permanently assign the attached tape drive to your Activation
Code. The details of the activation will be displayed in the lower pane of the License
Administration Utility. Then click
‘OK’
2.4.5
Reboot the computer after successful completion of the installation wizard.
