User Guide: XenData X1500 LTO-5 Archive System
14
3.3 Changing the Connected LTO Tape Drive(s)
To add or remove one or more LTO tape drives, please power down the system as described above, attach
or remove the tape drive(s) and then follow the power-up procedure as described above.
If you are adding an LTO tape drive that has not previously been used on this workstation, please follow the
procedure described below.
For LTO Drives Previously Licensed -
If one of the attached LTO tape drives has not been used on
this workstation previously but has been licensed on another workstation, please ensure that this
workstation has an Internet connection. The first time that the XenData6 Workstation software identifies
a new tape drive, it will use the Internet connection to determine if the drive is licensed.
For LTO Drives Not Previously Licensed -
You will need a valid XenData Activation Code for each
tape drive. Please use the XenData License Administration Utility to license each drive.
