User Guide: XenData X1500 LTO-5 Archive System
10
2.3 Installing the Software
When an Internet connection is available for the workstation computer, use the procedure described below.
2.3.1 Ensure that the hardware is connected as described above.
2.3.2 Power on the LTO tape drive(s).
2.3.3 Boot the workstation computer.
2.3.4 Configure Power Options for the workstation computer to prevent sleeping or hibernating. (This is
because any file transfers to or from LTO tape will pause if the workstation sleeps or hibernates.)
2.3.5 Ensure that the workstation computer is connected to the Internet.
2.3.6 Ensure that a device driver is installed for the LTO tape drive.
2.3.7 Select from the supplied CD or download the applicable XenData6 Workstation installation file - either
32 bit or 64 bit as appropriate for your Windows 7 operating system. Double click on the
XD6Workstation_setup file to launch the installation wizard and proceed as described below.
2.3.8 Carefully review the License Agreement and, if you agree, accept the terms of the agreement.
