SuperPro
®
6100 Programmer
www.xeltek.com
26 / 64
1296 Kifer Rd. Suite #605
Sunnyvale, CA 94086
Tel: +1 408-530-8080
Fax: +1 408530-0096
2. Save the data in the buffers in the text form.
The user can save the data in the buffer to the specified file in the text form as
follows:
HEX/ASCII data buffer:
00000000 4D 5A 90 00 03 00 00 00-04 00 00 00 FF FF 00 00 MZ.._..._.......
00000010 B8 00 00 00 00 00 00 00-40 00 00 00 00 00 00 00 ........@.......
00000020 00 00 00 00 00 00 00 00-00 00 00 00 00 00 00 00 ................
00000030 00 00 00 00 00 00 00 00-00 00 00 00 80 00 00 00 ................
Fuse data buffer:
00000768 10011010101010101010101010101010
00000800 01101010101010101010101010101010
00000832 10100110101010101010101010101010
00000864 10101010011010101010101010101010
00000896 10101010101001101010101010101010
00000928 10101010101010100110101010101010
00000960 10101010101010101010011010101010
00000992 10101010101010101010101001101010
4.1.2.1.1 HEX/ASCII data buffer
The HEX/ASCII data buffer is 8-bit wide. TAB key may be used to switch between
HEX and ASCII data for editing. According to the rule, if required to enter start and
end addresses, the value of start address must be less than that of the end address.
Locate:
In Locate Buffer
（
<Locate>
）
dialog box, enter the address of the data you wish to
display and press ‘OK’. The cursor will move to the location quickly.
Fill:
