SuperPro
®
6100 Programmer
www.xeltek.com
23 / 64
1296 Kifer Rd. Suite #605
Sunnyvale, CA 94086
Tel: +1 408-530-8080
Fax: +1 408530-0096
When the data type is Data (HEX/ASCII data), the files can be further divided into
many different types according to their storage forms. Therefore, it can be ensured to
load the data correctly after the corresponding file type is selected.
If the data type is Fuse, the data file type is JEDEC and the file extension is “jed”.
There is no need to select the data file type for JEDEC file. Altera Corporation uses
the file of POF format. If the users need to program the chip made by Altera
Corporation, please refer to “Detail Explanations on Common Problems”.
3. File types. They include the binary, Intel Hex (or extended), Motorola S record,
Tektronix Hex, etc.
4. File Loading Mode. It can be divided into the following classifications (the unit is
byte):
<Normal> : load the whole file.
<Even> : load the first byte of every two bytes and discard the second byte.
<Odd> : load the second byte of every two bytes and discard the first byte.
<1st byte of 4> :
load the first byte of every four bytes and discard the other three bytes.
<2nd byte of 4> :
load the second byte of every four bytes and discard the other three
bytes.
<3rd byte of 4> :
load the third byte of every four bytes and discard the other three
bytes.
<4th byte of 4> :
load the fourth byte of every four bytes and discard the other three
bytes.
<1st 2_byte of 4>:
load the first two bytes of every four bytes and discard the other two
bytes.
