For best results place Forward Base (A) (Damper Fan)
upside down on a soft and secure surface. Once this is
done, the pre- screwed holes for Forward Base Leg (C)
will be visible. To bolt in Forward Base Leg (C) into
Forward Base (A), place directly on top of pre-screwed
holes. Secure with 2 (J1) Bolt(s) and (J2) Washer(s).
2-1
Please LIGHTLY pull wires so that they do not
recede into the stem of Base Leg (A). DO NOT
CUT WIRES; wires will connect to console tube
when installing console.
CAUTION
: PLEASE HANDLE WITH CARE,
AS ELECTRICAL WIRES ARE DELICATE. IF
WIRES ARE HANDLED TOO AGGRESSIVELY
THEY WILL DISLOCATE.
Once the wires are exposed,
CAREFULLY connect wires.
2-1
2-2
2-3
2-2 Once wires are connected CARE-
FULLY secure Console Tube (G) to
the stem of Base Leg (A). PLEASE BE
CAREFUL OF EXPOSED WIRE ENDS.
THE WIRES SHOULD RECEDE BACK
INTO STEM ONCE CONNECTED IN
ORDER TO PREVENT DAMAGE OR
DISLOCATION.
2-3 Once both console stems are secured
you are now able to install Console (G6).
To Secure Console (G6) attach to Con-
sole Tube (G) and secure with 4(J9) Bolts.
Summary of Contents for Air Rower AR-2
Page 1: ...2...
Page 11: ...C5 C3 A62 K J0...
