Step 4.
Slightly loosen the Knob (A11) and then insert the Handlebar (E) to the Main Frame Set-(AS).
Secure the Console Set(GS) onto the Handle Bar (E) with 1x Hex Head Screw (J8),
2x Flat Washer (J6), 2x Flat Washer (J5), 1x Nut (J4) and 2x Console Pivot Bushing (J7).
Finally, put on2x Nut Cap (J9). Connect the Console Wire (M4) with console wire in Console Set(GS).
Then, connect the other end of the Console Wire (M4) together with the Generator Wire (M1),
the VR Sensor Wire (M2) and the Resistance Level Wire (M3).Secure the Console Wire (M4) to the
Handle Bar (E) with 1 x Screw (M5).
Attach the Left Pedal (G1) onto the Main Frame Set(AS) by screwing in Counter-Clockwise;
repeat for the Right Pedal (G2) by screwing in Clockwise.
Step 3.
AS
E
J4
GS
J5
J6
J7
J8
J9
A11
M4
M3
M2
M1
M5
G1
G2
AS
