Use 3-in-1 OIL only. Do not use anything else!
1.
Pedal Check
:
(Monthly):
Tighten the pedals with a 15mm wrench. The right side pedals will tighten “righty tighty” (clockwise)
and the left side pedal will tighten “lefty tighty” (counter-clockwise).
2.
Handlebar Assembly Check (Monthly)
I
nsert Screw Driver through peg of bike and tighten
3.
Handlebar Assembly Check (Monthly):
Tighten the handlebar using a 22mm wrench. Tighten these down as tight as possible for both sides.
Next, tighten handlebar assembly peg nut with 22mm socket wrench.
Note: There will be a little play
in these arms after tightening but this is normal.
XEBEX AIR BIKE
Maintenance Information
Service
Daily
Monthly
Quarterly
Annually
Clean/Dry Frame & Console w/ mild soap and cloth
X
Inspect Unit for Noise or loose components
X
Ensure Unit is level-Adjust Stabilizer Feet
X
Tighten Crank & Bell Crank Bolts, Tighten Pedals
X
Tighten Seat Bolts
X
Tighten Handlebars
X
Check and Tighten Linkage Arm Pivot points
X
Change Console Batteries
X
Lubricate Chain
X
Inspect & Adjust Chain Tension if Needed
X
Tighten Main Frame Bolts and Stabilizers
X
-See detailed instructions below
