A
SSEMBLY
S
TAGE
#3
Attach Seat Slider and Seat to Main Base Assembly
Assembly Description:
A) Insert the
Adjustable Seat Slider
(#7) into the u-channel of the
Seat Support Post
(#8). Secure the seat slider
assembly in place using the 1-
Seat Adjustment Knob
(#10).
Seat Adjustments:
Adjust the seat height by unscrewing and pulling out on the
Seat Post Adjustment Knob
(#12)
.
Select a
desired seat post height and retighten the knob until seat post is secure.
Proper
Height Adjustment:
Adjust seat height so the user
is comfortable during use (pedaling motion). As a reference point, the users leg should be slightly bent at the bottom of the pedal
stroke. The horizontal seat position can be adjusted using the
Seat Slider
(#7) . Note: If the seat post wobbles during use, make sure
the u-clamp and all adjustment knobs are securely tightened.
Assembly Stage #3 completed
.
A
SSEMBLY
I
NSTRUCTION
P
AGE
6
B) Place
Seat(
#9) onto the plate of the seat slider (3 bolts are already fixed on the seat), and assemble it using
3-
Flat Washer(#24)
and 3-
Nylon Nut
(#32). Set the seat at the desired position and secure it in place by
tighetening the u-clamp on the underside.Tighten the clamp until the seat no longer twists or tilts.
Assembly Hardware Required:
(*Assembly hardware may be pre-installed)
#24 Flat Washer *
Qty. 3
#32 Nylon Nut M8 *
Qty. 3