Battery Acid Leakage can cause severe
injury to people and cause significant
damage to the product and to property that
comes within contact with it. If battery
leakage occurs, wear hand & Eye
protection and wash with water and baking
soda (if available) and make sure to not
get any acid on you or your clothing. If you
get acid on your clothing – wash them
immediately or damage may occur. If you
get acid on your body, rinse with water
immediately and seek medical attention.
Dispose all batteries according to Local,
State and Federal Law
BATTERY WARNING:
3
Battery Installation
(Adult installation required)
3 AA Batteries are required but not included.
The Battery Compartment is located on bottom of swing.
Two screws are used to secure the Battery Cover.
Use #1 Phillips screwdriver to remove screws and cover.
Insert 3 "AA" Batteries.
Make sure to match polarity of batteries with polarity of unit.
Replace Battery Cover and secure with screws.
Make sure Cover is properly seated to keep out moisture.
Operation/Activation
Press RED button under swing to activate LED lights.
Swinging motion of the swing will keep lights enabled/on.
Lights will automatically turn off after 8-10 minutes of non-use / non-motion.
When lights get dim or go out, replace with new or re-charged AA batteries.
All images shown are for illustration purpose only. Actual product may vary due to product enhancement.
“ON”
Button
Battery
Cover
Screws
(#1 screwdriver)
Cover
removed
