XDP Recreation Firefly 75115 Product Manual Download Page 2

Page: 2 / 4

Tools Required:

1) Adjustable Wrench Or Wrenches

Assembly:

PARTS LISTING for Assembly:

J1 – Rope/Chain (2 each)
(Attach to Swing via J3)

J3 – Eye Bolt with Attachment Bolt.
(Pre-Assembled to ROPE) (2 each)

K1 – LED SWING (1 each)

J6 – Nut (2 each)

J7 – Flat Washer (2 each) **
MUST be ON the ASSEMBLY

J9 - Plastic Cap / Washer (2 each)

C1 – CARABINERS, Locking (2 each)
attaches to Chain, on Top

Images and illustrations not to scale.

All images shown are for illustration
purpose only. Actual product may vary
due to product enhancement.

Summary of Contents for Firefly 75115

Page 1: ...ns 1 Do not return to retailer Included In Kit 1 LED Swing 2 Rope Chain 3 Carabiners 2 Each 4 Hardware For Assembly Washer Cap Washer Nut 2 Each Of Each Component 5 Assembly Instructions WARRANTY Limi...

Page 2: ...bled to ROPE 2 each K1 LED SWING 1 each J6 Nut 2 each J7 Flat Washer 2 each MUST be ON the ASSEMBLY J9 Plastic Cap Washer 2 each C1 CARABINERS Locking 2 each attaches to Chain on Top J7 J6 J9 J7 J6 J9...

Page 3: ...are required but not included The Battery Compartment is located on bottom of swing Two screws are used to secure the Battery Cover Use 1 Phillips screwdriver to remove screws and cover Insert 3 AA Ba...

Page 4: ...on the seated swing Centered properly on the swing and holding firm to the Rope Chain Do not loop the Rope Chain over any top bar or tree limb etc Do not Twist or helicopter the rope chain while swin...