DO NOT RETURN TO RETAILER YOU PURCHASED AT.
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or [email protected]
3
INSPECTION PRIOR TO EACH USE OR DAILY INSPECTION
DO NOT
use the equipment if any bolts or nuts are missing or loose.
ALWAYS
check to ensure the equipment
and all parts are well secured and stable before each use.
ALWAYS
clear the area of any rocks, sharp objects, or any materials that could be potentially hazardous to
users.
DO NOT
attach items to the equipment that are not specifically designed for use with the equipment, including,
but not limited to, jump ropes, clothesline, pet leashes, cables and chains, or children's swings as they may
cause choke hazards and the product is not designed for any of these components.
The steel and plastic parts used in your product are subject to normal wear. Gradual deterioration of the
material will occur, the speed of which will depend on the level of exposure to UV rays, airborne pollution,
outdoor weather conditions such as rain and wind and the amount of use. You must inspect the equipment
prior to every use. This includes, but is not limited to inspecting the set for cracks, excess wear, missing parts,
loose connections, and for overall integrity. When the set shows any signs of weakness, you must stop using
the play set immediately, properly store the set or restrict access by users until the condition is resolved.
When conducting inspections, it is recommended that you use the Suggested General Maintenance
Checklist and Routine Inspection and Maintenance Issues checklists provided by the US Consumer
Product Safety Commission, a copy of which is contained in this user manual.
CARE & MAINTENANCE INSTRUCTIONS
Inspect all nuts and bolts twice monthly during the usage season for tightness and tighten as required. It is
particularly important that this procedure is followed at the beginning of each season.
Oil all metallic moving parts monthly during the usage period.
Sand rusted areas on metal tubing and repaint using a nonlead-based paint meeting the requirements of Title 16
CFR Part 1303.
Check all coverings for bolts and sharp edges twice monthly during usage season to be certain that they are in
place and replace when necessary. It is especially important to do this at the beginning of each new season.
Do not use when the temperature drops below 32 degrees F (0 degrees C); remove and store your lawn swing
from the frame.
XDP RECREATION DOES NOT WARRANT ANY LAWN SWING WHICH IS ATTACHED BY THE
PURCHASER TO THIS FRAME. THIS FRAME IS DESIGNED AS A REPLACMENT ONLY. IT IS THE
CONSUMERS REPSONSIBILITY TO ENSURE THAT THE FRAME MEETS THE REQUIREMENTS OF THEIR
OWN LAWN SWING SEAT AND ALL WEIGHT RESTRICTIONS FOR THIS FRAME (600 LBS MAXIMUM
WEIGHT CAPACITY)
.
