background image

 

DO NOT RETURN TO RETAILER YOU PURCHASED AT. 

CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or [email protected] 

  IMPORTANT INSTRUCTIONS AND WARNINGS 

 

 

WARNING 

READ ALL INSTRUCTIONS BEFORE ASSEMBLING OR USING THIS EQUIPMENT 

 

HARDWARE AND SWING BEARINGS ARE INCLUDED - CHAINS ARE NOT INCLUDED. 

 

AGE LIMIT 

 

This  product  is  designed  to  be  used  with  lawn  swings  which  will  fit  this  frame  properly.   

TOTAL  MAXIMUM 

USER WEIGHT INCLUDING THE LAWN SWING (which is not included) is 600 pounds (272.15 kgs). 

 

This unit is not designed for children or to hold any other type of attachment except for a lawn swing!     

 

Do not allow use by adults with any physical condition that may affect his/her ability to use this equipment safely. 

 

Chains are NOT included with this frame. 

 

BEFORE YOU BEGIN 

 

Carefully read all instructions in this manual before assembling and using this product.     

 

The  unit  must  be  assembled  by  adults.  Heavy  duty  working  gloves  must  be  worn  to  avoid  injuries  during 

assembly.   

 

Adults must not use the equipment until it is properly assembled and anchored.     

 

Unpack all parts. Take a complete inventory of all parts and hardware using the parts and hardware lists in the 

following pages. If any parts are missing, do not return to the store. Please call customer service toll-free number 

listed on the cover page for assistance. Store the product back in the original box and do not begin to install until 

all parts are obtained.     

 

LOCATION OF LAWN SWING FRAME 

 

The equipment must be placed more than six (6) feet (1.8 meters) from any structures or obstructions, including 

but not limited to buildings, fence, garage, trees, laundry lines, electrical wires.     

 

The  FRAME  must  be  installed  on  level  ground

.    Uneven  ground  must  be  leveled  prior  to  installation.   

Installation  on  sloping  or  uneven  ground  will  put  stress  on  the  joints,  causing  the  unit  to  become  loose  and 

unstable which may result in serious injuries. 

 

Remove any tripping hazards from the safe swing area, such as roots, tree stumps, rocks, landscaping, sprinkler 

heads, railroad ties, plumbing and electrical connections. 

 

Windy conditions: it is possible for the product to be blown about by a high wind. if you anticipate high 

winds, the frame should be secured to the ground with the use of an Anchor kit. If you anticipate severe 

winds, the product should be moved to a sheltered location or completely disassembled.  Anchor kits 

can  be  ordered  directly  from  XDP  RECREATION  at  https//:www.xdp-recreation.com  or  by  calling 

1-866-844-0535.   

Summary of Contents for 71900

















Reviews: