Xcruiser XDSR600HD, User Manual

Page: 16 / 71

XDSR600HD
16
5. Multi-Brand IR Remote Controller Setting
2. Auto Code Search
Step 1
: Turn on the DEVICE what you want to
set up(TV, DVD)
Step 2
: Press
DEVICE
and
OK
buttons during
about 2 seconds at the same time.
DEVICE LED will blink twice.
Step 3
: Press UP or Down button within 10
seconds to enter the Search mode.
Step 4
: Press
UP
or
Down
button until the
DEVICE turns off, one and one.
Step 5
: If your DEVICE turns off, press OK
button.
DEVICE LED will blink twice.
NOTE : When there is no input during about 10 seconds from set mode, set mode is canceled.
3. Code No. Checking (Number
Call)
Step 1
: Press
DEVICE
and
OK
buttons during
about 2 seconds at the same time.
DEVICE LED will blink twice.
Step 2
: Press INFO button within 3 seconds.
LED will blink according to inputted mode
number on the device.
(Case of digit ‘0’, it blinks 10 times.)
1. Direct Code Entry
Step 1
: Turn on the DEVICE what you want to
set up(TV / DVD / VCR)
Step 2
: Press
DEVICE
and
OK
button during
about 2 seconds at the same time.
DEVICE LED will blink twice.
Step 3
: Input the 3 digit code numbers.
(Refer to
‘Code Table for Universal Remote Control Unit’
in the rear section of this manual
)
DEVICE LED will blink twice and the DEVICE
turns off.
If you enter a wrong DEVICE code, DEVICE will
blink once
Step 4
: If your DEVICE turns off, press
OK
button.
DEVICE LED will blink twice.
www.xcruiser.net
XDSR600HD XDSR600HD
www.xcruiser.net
: Turn on the DEVICE what you want to : Turn on the DEVICE what you want to
OK OK
buttons during buttons during
OK OK OK
about 2 seconds at the same time. about 2 seconds at the same time.
DEVICE LED will blink twice. DEVICE LED will blink twice.
: Press : Press UP UP or or Down Down button within 10 button within 10
seconds to enter the Search mode. seconds to enter the Search mode.
Step 4 Step 4
: Press : Press
UP UP
or or
Down Down
button until the button until the
DEVICE DEVICE turns off, one and one. turns off, one and one.
Step 5 Step 5
: If your DEVICE turns off, press : If your DEVICE turns off, press
button. button.
DEVICE LED will blink twice. DEVICE LED will blink twice.
3. Code No. Checking (Number 3. Code No. Checking (Number
Call) Call)
Step 1 Step 1
: Press : Press
DEVICE DEVICE
about 2 seconds at the same time. about 2 seconds at the same time.
DEVICE LED will blink twice. DEVICE LED will blink twice.
DEVICE LED will blink twice and the DEVICE DEVICE LED will blink twice and the DEVICE
If you enter a wrong DEVICE code, DEVICE will If you enter a wrong DEVICE code, DEVICE will
: If your DEVICE turns off, press : If your DEVICE turns off, press
OK OK
DEVICE LED will blink twice. DEVICE LED will blink twice.