xcore XVR264-X20C User Manaul Download

Page: 10 / 112

2010.10.15 H.264 DVR 8CH/16CH User Manual v1.1

CHAPTER 2

PANEL LOCATION

2-1 FRONT PANEL CONTROLS

⑰

⑭

⑬

⑪

⑫

①

②

③

④

⑯

⑮

⑨⑩ ⑧ ⑦ ⑥ ⑤

Control Keys

Description

○

REC

Start or stop recording.

○

PLAY

Play back in normal speed.

○

T-SH

Display the search menu.

○

BACKUP/ESC

In LIVE mode, press to display the BACKUP menu. In SETUP mode,
press to return to previous page.

○

In LIVE mode, press to display menu. In PLAYBACK mode, press to pause
playback.

⑥

AUTO

In LIVE mode, cycle through all channels in full screen.

○

ZOOM

In LIVE or PLAYBACK mode, enlarge the display of a channel.

○

PIP

In LIVE mode, display with picture in picture format.

○

ENTER/MODE

In SETUP mode, press to enter values. In PLAYBACK mode, switch
between full, quad, 9-channel, 16-channel display in order.

○

In SETUP mode, press to move cursor down. In PLAYBACK mode, press
to stop playing back.

○

SLOW

In SETUP mode, press to move cursor up. In PLAYBACK mode, press to
slow down.

○

In SETUP mode, press to increase value. In PLAYBACK mode press to
play forwards.

○

In SETUP mode, press to reduce value. In PLAYBACK mode, press to
play rewind.

○

LED Display

(From left to right)

Power

Power is on.

HDD

Hard disk is in use.

LAN

Connected to the internet

(in red)

: Remote user logged in.

REC

Recording.

PLAY

Playing back.

⑮

IR Sensor

Input sensor for the remote control.

USB 2.0 Port

Port for USB external devices (USB flash drive devices use, the mouse
behind the back of the USB ports installed)..

DVD Writer

Optional DVD-RW backup device.

Summary of Contents for XVR264-X20C

















































































































Search results

Summary of Contents for XVR264-X20C

Reviews:

Related manuals for XVR264-X20C

Brands by name

Popular brands

xcore XVR264-X20C, User Manaul

Search results

Summary of Contents for XVR264-X20C

Reviews:

Related manuals for XVR264-X20C

Brands by name

Popular brands