background image

14

Maintenance of the camera

CLEANING THE LENS

Install the lens protector (included) on the lens of the camera when it is 

used without the waterproof housing. To clean the lens, use an air blower 

to remove dirt such as dust or sand. Then gently wipe the lens tissue  

(included) on the lens.

CLEANING THE CAMERA

Gently wipe the camera with a soft, dry cloth. DO NOT use thinners or other 

cleaners to clean the camera, these products can cause damage.

CLEANING THE WATERPROOF HOUSING

It is important that the rubber gasket is always clean to ensure a 

perfect seal. 

Rinse the housing in fresh water and shake it to dry. Do not 

use a cloth to dry the seal, as lint may settle there and compromise the  

effectiveness of thereof. After the use of the housing in salt water, rinse it in 

fresh water and dry it. The salt can accumulate on the seal and the buttons 

may rust.

Note:

 It is important to follow these tips, because the warranty does 

not cover any GG Telecom products which has been subjected to water 

 

damage due to an user error.

WARNINGS

• 

Never place the camera or the battery inside or above a heating device 

such as a microwave oven, a stove or a radiator. This could lead to over-

heating or the deformity of materials, or even cause a fire or explosion.

•  Protect the lens from fingerprints and scratches using the lens protector 

or waterproof housing. 

• 

Do not expose the memory card to extreme temperatures (below -20 

°C or above 50 °C). This may cause the memory cards to malfunction.

• 

Insert the memory card in the correct direction, otherwise it may  

damage the camera and the memory card.

•  Do not bend, drop or subject the memory card to shock or pressure.

• 

Do not put the memory card into contact with liquids, dust or foreign 

bodies. If the memory card is dirty, clean with a soft cloth before you 

insert it into the camera.

•  Do  not  place  the  camera  on  flammable  surfaces  such  as  bedding, 

 

blankets, carpets, or electric blankets for extended periods.

• 

Use only replacement lithium-ion battery XHD-BATT. (sold separately, 

see ”Available accessories“ section).

• 

Cold temperatures can affect battery life.

• 

If the camera is not used for an extended period, remove the battery. 

The batterie may leak or corrode over time and cause serious damage 

to the camera.

Summary of Contents for Hunting Edition


















Reviews: