XCAT Sail, Owner'S Manual

Page: 7 / 68

Introduction and important notes
Manual XCAT Sail Page 7 Edition: 05/2023
A plastic polishing compound can be used to polish the hulls for heavier dirt.
Always store the hulls with the keel upwards so that water does not
permanently run into the flanges.
Do not store the hulls permanently in the sun on one side, otherwise they
may warp.
Do not store the hulls in the sun under a cover. This can cause heat buildup
and warping of the hulls.
Do not store the outboard seats permanently in the blazing sun, as they are
not completely UV-resistant. Dismantle the outboard seats after sailing and
store them in the shade or cover them (also recommended against dirt and
especially bird droppings).
Always maintain your XCAT properly and take into account the wear and tear
that occurs over time due to frequent use or improper use.
Row&Sail GmbH cannot be held responsible for changes that it has not
agreed to.