User Manual XCAT eProp
Page 26
Edition: 02-2023
The following table tells you how to switch the VAQUITA remote control on or off
correctly.
Switch On/Off
Operation
LED
Buzzer
Switch on
Short press on/off button
On
One beep
Switch off
Press on/off button for 3s
Off
One beep
While switching on the remote control, if it beeps every 1s for 5 successive
times, it is warning the remote control is running out of power. After the low
battery warning, the remote control will resume normal and can last only for a
short period of time. Please prepare a new button cell (model: CR2032) and
replace the battery as soon as possible. Please refer to section 4.5.3 to learn
how to replace the button cell.
If it is not at the pairing mode, but the LED is flashing quickly, it is warning that
there is a communication failure, and the remote control will turn off in 5 minutes
automatically.
If the throttle is not at zero position before switching on the remote control, after
switched on, the LED will flash slowly to indicate dislocation of throttle. Return
the throttle to zero position, and the LED will resume normal.
If the remote control is switched on but without any operation for 30 minutes, it
will switch off automatically.
Press the on/off button on the VAQUITA remote control to stop the motor
immediately in emergency situations.
Never get close to the running propeller to avoid injury.
