User Manual XCAT eProp
Page 15
Edition: 02-2023
3.2.
Installing the eProp outboarder on the XCAT
1) Check whether the eProp is in the swinged-up position.
2) Check whether the hand knob is open.
3) Push the eProp from behind onto the center beam profile and pull the locking
bolt. Now push the holder forward until the locking bolt engages in the hole of
the center beam profile.
4) Use the hand knob to clamp the eProp to the center beam.
3.3.
Connecting Battery to Motor
After the eProp outboard and the battery are mounted on the XCAT, you can connect
the motor to the battery. Insert the plug of the motor cable into the charge/discharge
port of the VAQUITA battery and fix the plug. Fix the power cable with Velcro strap so
that it does not interfere or hang in the water.
Make sure VAQUITA Battery is switched off and the connectors are dry before
installing the motor.
