background image

IMPORTANT SAFETY INSTRUCTIONS! 

WARNING 

Read all instructions before using this heater!

This heater is 

hot when in use

. To avoid burns, 

DO NOT

 let bare skin touch 

hot

 surfaces. If

provided, use handles when moving this heater.  Keep 

combustible materials

, such as

furniture, pillows, bedding, papers, clothes, and curtains at least 

3 feet (0.9m)

 from the 

front of

the heater

, and 

keep them away from the sides and rear

.

Extreme caution

 is necessary when any heater is used by or near 

children

 or 

invalids

 and

whenever the heater is left 

operating and unattended

.

DO NOT

 operate any heater with a 

damaged cord or plug

 or after the 

heater malfunctions

,

has been 

dropped

 or 

damaged in any manner

. Discard heater, or return to authorized service

facility for examination and/or repair.

DO NOT

 run 

power cord

 under carpeting. 

DO NOT

 cover power cord with throw rugs, runners,

or similar coverings. 

DO NOT

 route power cord under furniture or appliances. Arrange power

cord 

away from traffic

 area, and where it will not be tripped over.

Connect to properly grounded outlets ONLY.

DO NOT insert

 or 

allow foreign objects

 to 

enter any ventilation or exhaust opening

, as

this may cause 

electric shock

 or 

fire

, or 

damage the heater

.

To prevent a possible fire,

 DO NOT 

block air intakes or exhaust in any manner. Doing so could

cause a 

fire

DO NOT

 use on soft surfaces, like a bed, where openings may become blocked.

A heater has 

hot and arcing or sparking parts inside

DO NOT

  use it in areas where

gasoline, paint, or flammable liquids

 are used or stored.

Use this heater only as described in this manual. Any other use not recommended by

the manufacturer may cause fire, electric shock, or injury to persons.

ALWAYS plug heaters directly into a wall outlet/receptacle. NEVER use with an

extension cord or relocatable power tap (outlet/power strip).

DO NOT

 

place the heater near a bed

 because objects such as pillows or blankets can fall off

the bed and be ignited by the heater.

NEVER

 use this heater in 

bathrooms, laundry rooms

, or any other location where the heater

could fall into a 

bathtub 

or 

pool

become damp,

 or 

come in contact with water

.

AVOID FIRE!

 Regularly inspect all air vents to make sure they are free from dust, lint, or other

blockage. 

Unplug the unit

 and clean with a 

vacuum ONLY

DO NOT

 rinse or get wet.

ALWAYS attach

 

all four legs before

 

plugging in

 or 

turning on

 this heater!  Failure to do so

could 

result in fire

.

NEVER

 plug in or turn on this heater with the 

air vents touching the ground

!  Doing so could

result in fire

.

Summary of Contents for HT9737ME









Reviews: