7
1
. Allow the fireplace to cool down before moving it.
2
. Lay the fireplace down on a soft surface.
3
. Unscrew the two bulb plate screws and remove the bulb plate.
4
. Carefully unscrew the light bulb
and replace it with another 40W candelabra style light bulb of the same design.
5
. Replace the bulb
plate and secure it in place with the two screws. Note: Do not over-tighten the screws.
WARNING!
Other than replacing the light bulb,
NO SERVICING
of the internal or
electrical parts should be performed by the consumer. Do not service the unit yourself.
CLEANING
Metal:
•
Buff using a soft cloth, slightly dampened with a citrus oil-based product.
•
DO NOT
use brass polish or household cleaners as these will damage the metal.
Glass:
•
Use glass cleaner and dry thoroughly with a paper towel or lint-free cloth.
•
NEVER
use abrasive cleansers or any cleaner that could scratch the surface.
Plastic:
•
Wipe with a slightly damp cloth and a mild solution of dish soap and warm water.
Vents:
•
Use a vacuum or duster to remove dust and dirt from the heater and vent areas.
NEVER immerse in water
or
spray with water.
Doing so could result in
electric shock,
fire, or personal injury.
MAINTENANCE
Risk of
electric shock
!
DO NOT OPEN the main panels!
No user-serviceable parts
inside!
Storage:
•
Store heater in a clean dry place when not in use.
Electrical and Moving Parts:
•
The fan and motors are lubricated at the factory and will not require lubrication for the life of
the stove.
•
Except for the light bulb(s), all electrical parts and components are integrated into the heater
and are not serviceable by the consumer.
