Xblue Networks X-50 Installation Manual Download Page 188

Page: 188 / 260

Voice

190

XBLUE Networks

Nu
mb
ering

Pla
n

The operator extension can be set to any number within the numbering plan.

•

The day and a night operator can be the same or different extension numbers. The entered

extension number will be accessed when an extension dials zero (0).

•

A day and a night alternate operator can also be assigned. They can be the same or different

numbers. The Alternate operator will automatically begin ringing if the call goes unanswered

by the operator extension.

•

Reroute Time - is the amount of time that a call will ring at the operator extension before

ringing the alternate extension. When set to unlimited, the call will not forward. The timer

can be set from 15 to 180 seconds. If the alternate attendant does not answer the call, and

this timer is greater than zero (0) the call will go to the operator mailbox.

Press “Save Settings” to save the programming and “Back” to return to the main Numbering Plan Programming

page.

•

Voicemail Service Number - Is the pilot number that will be dialed to ring one of the four voice mail

ports.

•

Start PSTN Line Number - The

X-50

has 6 PSTN lines, numbered 701, 701,702, 703, 704 and 705.

•

Start IP Trunk Number - The

X-50

has 8 SIP Trunks, number 711, 712, 713, 714, 715, 716, 717 and

718.

•

There are 4 trunk group numbers, 80, 81, 82 and 83, each can have one or more trunks, with a

combination of PSTN and/or SIP Trunks.

•

All Paging Group - Dial this code to page all extensions in the system.

•

Range - LAN, WAN and/or Both (All extensions must be in the same subnet)

Summary of Contents for X-50





































































































































































































































































Search results

Summary of Contents for X-50

Reviews:

Related manuals for X-50

Brands by name

Popular brands

Xblue Networks X-50, Installation Manual

Search results

Summary of Contents for X-50

Reviews:

Related manuals for X-50

Brands by name

Popular brands