XBLUE QB Setup Guide
12/17
Getting your XBLUE IP Phones working
From the Main Menu or from the Desktop start the Auto Provisioning App to get
your XBLUE IP Telephones functional on the QB Server.
“Provisioning” is the
process of loading the unique configuration for the phone for system use. The Auto
Provisioning application makes finding connected telephones on the network easy.
It will also allow you to assign extension numbers to the phones. Extension
numbers are an ID of that telephone on the system and provide for inter-office calling between the
telephones of the system.
Connect your XBLUE IP Phones
1.
If your XBLUE IP Phones aren’t already connected to the
network, connect them now.
a. Use the diagram as a guide to connect your
XBLUE IP Phones to your network.
The NETWORK connector is in the
center and is connected to the
network wall jack.
b. You can use the PC connector to connect your
computer to the same network.
c. IP Phones must be connected to the same network as the QB Server. (The wall jack
must go to the same data-switch and router to which the QB server is connected.
d. IP7g telephones are pre-loaded with XBLUE functions to allow seamless operation
with the QB server.
2. Once all telephones are connected to the network and powered up, click
the Auto Provisioning icon to start the App.
3. The App will open and immediately perform a network scan to find the
XBLUE IP Phones.
4. Once the scan is complete the list of phones discovered will appear. Pick
any one telephone on this list to assign it an extension number and
registered to the QB server.
a. Note: if phones are not discovered they are either on a different
network or connected by a router that is isolating them form the network to which the
QB server is connected.
