Xblitz Z4, User Manual

Page: 35 / 108

35
EN
04. BEFORE USE
1. It is recommended to use branded micro SD cards (8GB to 32 GB)
of speed class 10.
2. Before inserting the card into the recorder, you must format it into the
FAT32 file system on your computer, then in the DVR.
3 . Install the memory card when the device is turned o , otherwise
the card and device may be damaged. The same applies to card removal.
4. Fully charged battery allows you to record without power for
max 5 minutes. The battery in the device is mainly used to maintain the
DVR settings.
5. When the memory card is full, the oldest unsecured recordings will
be overwritten.
6. It is recommended to use the functions of the device for their intended
purpose, that is, not to use MOTION DETECTION or PARKING MODE while
driving, as this may cause the device to turn on and o automatically, e.g.
when stationary at an intersection.
It is recommended to set the G - SENSOR option to a minimum in order
to avoid securing unnecessary materials and thus losing space on the
memory card. Format the card in FAT32 format first on your computer and
then in the DVR.
7. Sound: The device has a condenser microphone that records any ambient
noise. Sounds can overlap, causing distortion.