Xblitz V3 MAGNETIC, User Manual

Page: 33 / 36

11. If you smell of burnt plastic or electronics from the camera, disconnect the
device from the power supply as soon as possible and contact the service point.
09. SPECIFICATION
CPU:
Recording resolution:
Sensor:
Lens:
View angle:
Dimensions: h/w/d:
Weight:
Memory:
File format:
Power supply:
USB:
Microphone/Speaker:
GPS receiver:
Battery:
Nt96670
Max. 4K
SONY IMX 415
6G+IR
150 degrees
50x90x41mm
96g (w/o mount)
Micro SD card, to 256GB, speed class 10
MP4 H.265
5V
Mini USB (power supply)
Built-in
Included in magnetic mount
Built-in supercapacitor 2,7V/5F
33
EN
08. GPS
The camera has a built-in GPS receiver. It is designed to record the vehicle's
route and speed. You can turn the speed display on recordings o .
To record the car's route, download a GPS program from True 4K
+ Professional
product page on www.xblitz.pl and install it on your computer.
WARNING! Finding the GPS signal after turning the camera on can take
up to a few minutes. Signal reception depends on your location and
environmental factors (e.g. buildings or trees nearby), which can cause
latency in signal reception or lack of reception for a short time.