Xblitz V3 MAGNETIC, User Manual

Page: 26 / 36

1. Video mode settings :
a. Resolution – changes the resolution and frame rate of recorded videos .
b . WDR – turns WDR mode, which makes videos recorded with low light easier
to read, on/ o .
c . Exposure – changes the amount of light the camera sensor captures .
d. White balance – allows you to adjust the camera parameters to the lighting
conditions .
e . Time-lapse – turns on time-lapse recording mode in which the camera
records a new frame every specified period of time .
f . Audio – enables/ disables the camera's audio recording .
g . Date stamp – enables/ disables date and time stamp on the video .
h . Loop recording – enables/ disables loop recording mode, in which the
recorded video is split into files of the selected length and the oldest recordings
are overwritten by a new one.
i. G-Sensor – enables/ disables gravity sensor, which protects files recorded
when a sudden vibration happens (e.g. during sudden braking) .
j . Parking monitor – enables/ disables the parking mode, which starts the
camera and records a short protected video when vibrations are detected.
k . Motion detection - enables/ disables motion detection mode, which starts
the camera and records a short, protected video when the device detects
a moving object.
l . Number platr – allows you to enter the license plate numbers of your vehicle
so that they are displayed on the recording.
m. Fatigue driving – allows you to set an alarm, which will remind you to take
a break from driving after a set amount of time.
n . GPS stamp – enables/ disables GPS location data.
o . Speed units – allows you to change the speed units that are displayed
on the recording (km/h or mph).
26
04. SETTINGS