![background image](http://html.mh-extra.com/html/xantrex/xpower-powerpack-400-plus-400-r/xpower-powerpack-400-plus-400-r_owners-manual_881494036.webp)
Operation
3-10
975-0162-01-01
Jump-Starting a Vehicle’s Engine
You can use the XPower Powerpack to jump-start a vehicle
or boat engine that has a 12 V starting battery using the
supplied Jump-Start cables.
To jump-start a vehicle or boat engine:
1. Turn
OFF
the vehicle or boat ignition and all accessories.
2. Engage the park or emergency brake and place the
transmission in park for an automatic or neutral for a
manual.
3. If jump-starting a boat engine, purge the engine
compartment and bilge of all fumes before jump-starting.
WARNING: Fire hazard
Never allow cables’ red and black clamps to touch each other or
another common metal conductor. This could cause damage to the
unit and/or create a sparking/explosion hazard. Always disconnect
the clamps for the unit after use and clip the plastic guard over the
jump-start cable port.
WARNING: Fire hazard
Jump-start cable clamps’ connection to the vehicle’s battery
terminals must be positive to positive (red clamp to battery “
+
”)
and negative to negative (black clamp to battery “
-
”). A reverse
polarity connection (positive to negative) may cause damage to the
unit and/or create a sparking/explosion hazard.
WARNING: Risk of explosion, fire or burns
The battery terminals exposed at the Jump-Start Cable Port have
enough energy present to cause a spark, creating an explosion
hazard, or to cause burns if a metal object contacts both terminals.
Always clip the plastic guard over the Port when not in use.
Important:
Closely follow these instructions for jump-starting
your vehicle as they may be different from the instructions
supplied with other jump-start products or jump-start cables.
Summary of Contents for XPower Powerpack 400 Plus, 400 R
