![background image](http://html1.mh-extra.com/html/xantrex/xpower-5000/xpower-5000_installation-manual_3431900030.webp)
2–14
975-0411-01-01
This guide for use by qualified installers only
4. Remove an AC wiring knockout from the side or front of the unit.
5. Install a supplied strain-relief clamp in the AC knockout.
In Figure 2-6, the strain-relief clamp is shown installed on the front.
6. Locate the terminal block (see Figure 2-7).
The output terminals are labeled N (neutral), L (line), and G (ground).
Figure 2-6
AC Wiring Compartment Cover and Knockout Locations
AC cover
AC knockout with
strain-relief clamp
AC knockout