Xantrex XPLORE 120/12, Owner'S Manual, Page: 40 / 68

28 XPLORE 120/12 Battery Charger Owner's Guide
Figure 11 Securing the wires to the terminals
Method 1
b.
L
N
G
Method 2
a.
L
N
G
7. Connect the AC supply wiring from the charger to the AC
panel feeding the charger.
8. Connect the line conductor to the breaker, the neutral to the
neutral bus, and the ground to the ground bus. In Canada
and the USA, an external junction box is required between
the AC circuit breaker and the charger.
Figure 12 AC supply wiring
9. Secure cables in place using tie-wraps or cable straps
according to electrical codes.
10. Tighten the cable glands, if applicable.
11. Replace the wiring compartment cover.
WARNING
ELECTRICAL SHOCK HAZARD
n
Replace the wiring compartment cover before turning on
power to this equipment.
n
Use a torque screwdriver to tighten both the captive nut
panel screws to 5 in-lb (0.56 N-m) torque to ensure a
required tool access to the wiring compartment.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
.