Xantrex XPLORE 120/12, Owner'S Manual, Page: 20 / 68

Onboard Status LED Panel
8 XPLORE 120/12 Battery Charger Owner's Guide
Onboard Status LED Panel
This section describes the parts of the onboard status LED panel
of the XPLORE Charger. See
Reading Onboard Display LEDs on
page 1 for more information.
Figure 3 Onboard Status LED Panel
Item Description
Bank LEDs
n
- displays the status of BAT1 (group 1). Solid green
indicates battery is connected and detected. Off means
battery is not present.
n
- displays the status of BAT2 (group 1). Solid green
indicates battery is connected and detected. Off means
battery is not present.
n
- displays the status of BAT3-
BAT6 (group 2). Individual solid green indicates each
battery is connected and detected. Off means a battery
is not present.
Item Description
Status LEDs
n
Solid - battery is fully charged (float stage).
n
Flashing - battery is being charged (bulk and
absorption stages). A 0.5 Hz flashing sequence
indicates 0 to 25% SOC, 1 Hz = 25 to 50% SOC, 1.5 Hz =
50 to 75% SOC, and 2 Hz = 75 to 100% SOC.
Battery
Type LEDs
and Select
button
n
Select button - a short press will scroll through each
of the battery types in sequence. A long press while on a
selected battery type will confirm that battery type.
n
- a solid green on any of the LEDs
indicates that battery type is selected. A flashing green
indicates that an active selection is being made.
Charger
Status LEDs
n
- a solid green indicates AC power is available and
unit is able to charge.
n
- a solid green indicates charger is in energy saving
mode. A flashing green indicates the charger is in
standby mode, in booting up mode, or in event mode.
n
- a solid red indicates that the charger has detected
an event and charging at the output terminals is
disabled.