Xantrex XPH 35-5 Operating Manual Download Page 29

  

What does this warranty not cover?

 

This Limited Warranty does not cover normal wear and tear of the product or costs related to the 
removal, installation, or troubleshooting of the customer's electrical systems.  This warranty does not 
apply to and Xantrex will not be responsible for any defect in or damage to: 

a)  the product if it has been misused, neglected, improperly installed, physically damaged or altered, 

either internally or externally, or damaged from improper use or use in an unsuitable environment; 

b)  the product if it has been subjected to fire, water, generalized  corrosion, biological infestations, or 

input voltage that creates operating conditions beyond the maximum or minimum limits listed in the 
Xantrex product specifications including high input voltage from generators and lightning strikes; 

c)  the product if repairs have been done to it other than by Xantrex or its authorized service centers 

(hereafter "ASCs");  

d)  the product if it is used as a component part of a product expressly warranted by another 

manufacturer; 

e)  the product if its original identification (trade-mark, serial number) markings have been defaced, 

altered, or removed. 

Disclaimer

 

Product

 

THIS LIMITED WARRANTY IS THE SOLE AND EXCLUSIVE WARRANTY PROVIDED BY XANTREX IN 
CONNECTION WITH YOUR XANTREX PRODUCT AND IS, WHERE PERMITTED BY LAW, IN LIEU OF ALL 
OTHER WARRANTIES, CONDITIONS, GUARANTEES, REPRESENTATIONS, OBLIGATIONS AND LIABILITIES, 
EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE IN CONNECTION WITH THE PRODUCT, HOWEVER 
ARISING (WHETHER BY CONTRACT, TORT, NEGLIGENCE, PRINCIPLES OF MANUFACTURER'S LIABILITY, 
OPERATION OF LAW, CONDUCT, STATEMENT OR OTHERWISE), INCLUDING WITHOUT RESTRICTION ANY 
IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE.  ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE 
TO THE EXTENT REQUIRED UNDER APPLICABLE LAW TO APPLY TO THE PRODUCT SHALL BE LIMITED IN 
DURATION TO THE PERIOD STIPULATED UNDER THIS LIMITED WARRANTY. 

IN NO EVENT WILL XANTREX BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES, LOSSES, COSTS OR EXPENSES HOWEVER ARISING WHETHER IN 
CONTRACT OR TORT INCLUDING WITHOUT RESTRICTION ANY ECONOMIC LOSSES OF ANY KIND, ANY 
LOSS OR DAMAGE TO PROPERTY, ANY PERSONAL INJURY, ANY DAMAGE OR INJURY ARISING FROM OR 
AS A RESULT OF MISUSE OR ABUSE, OR THE INCORRECT INSTALLATION, INTEGRATION OR OPERATION 
OF THE PRODUCT. 

Exclusions

 

If this product is a consumer product, federal law does not allow an exclusion of implied warranties.  To 
the extent you are entitled to implied warranties under federal law, to the extent permitted by applicable 
law they are limited to the duration of this Limited Warranty.  Some states and provinces do not allow 
limitations or exclusions on implied warranties or on the duration of an implied warranty or on the 
limitation or exclusion of incidental or consequential damages, so the above limitation(s) or exclusion(s) 
may not apply to you.  This Limited Warranty gives you specific legal rights.  You may have other rights 
which may vary from state to state or province to province. 

Warning: Limitations On Use

 

Please refer to your product manual for limitations on uses of the product.   

SPECIFICALLY, PLEASE NOTE THAT THE XPH SERIES SHOULD NOT BE USED IN CONNECTION WITH LIFE 
SUPPORT SYSTEMS OR OTHER MEDICAL EQUIPMENT OR DEVICES. WITHOUT LIMITING THE 
GENERALITY OF THE FOREGOING, XANTREX MAKES NO REPRESENTATIONS OR WARRANTIES 
REGARDING THE USE OF THE XANTREX XPH SERIES

 

IN CONNECTION WITH LIFE SUPPORT SYSTEMS 

OR OTHER MEDICAL EQUIPMENT OR DEVICES. 

Please note that the XPH series

 

is not intended for use as an uninterruptible power supply and Xantrex 

makes no warranty or representation in connection with any use of the product for such purposes. 

 26 

Summary of Contents for XPH 35-5
































Reviews: