Transient Response:
<200µs to within 50mV of set level for 90% load change.
Temperature Coefficient:
Typically <100ppm/°C.
Status Indication:
Output on lamp. Constant current mode lamp.
METER SPECIFICATIONS (Main Outputs)
Meter Types:
Dual 3 digit meters with 14mm (0·56") LEDs. Reading rate 4 Hz.
Meter Resolutions:
100mV, 10mA.
Meter Accuracies:
Voltage 0.3% of reading ± 1 digit,
Current 0.6% of reading ± 1 digit.
AUXILIARY LOGIC OUTPUT (XPH 35-4T only)
Voltage:
Variable <1·5V to >5V by front panel control.
Meter Voltage Accuracy:
0·3% ± 1 digit
Current Limit:
5A minimum.
Output Protection:
Output will withstand up to 7V forward voltage.
Diode clamp reverse protection for currents up to 3A.
Load Regulation:
<0·5% for 90% load change.
Line Regulation:
<0·1% for 10% line voltage change.
Ripple & Noise
(20MHz bandwidth):
Typically <2mVrms, <10mVpk-pk (CV mode).
Transient Response:
Typically <200µs to within 50mV of set level for 90% load change.
Temperature Coefficient:
Typically <100ppm/ºC.
Status Indication:
UNREG lamp.
GENERAL
AC Input:
110V - 240V AC ± 10%, 50/60Hz. Installation Category II.
Power Consumption:
500VA max.
Operating Range:
+5ºC to +40ºC, 20% to 80% RH.
Storage Range:
−
40ºC to + 70ºC.
Environmental:
Indoor use at altitudes up to 2000m, Pollution Degree 2.
Safety:
Complies with EN61010-1.
EMC:
Complies with EN61326.
Size:
260 x 160 x 320mm (WxHxD).
Weight: 4·3kg
4
