![background image](http://html.mh-extra.com/html/xantrex/xdi2048/xdi2048_operating-manual_881454056.webp)
Remote Communication & Monitoring
4-2
TM-DIOP-01XN-01
Introduction
When installed, the optional TCP/IP enabled Ethernet communications
card and user interface provides remote monitoring and ON/STBY
control of a Xantrex Datacom Inverter module.
Web-enabled User Interface
•
Provides monitoring capability: Pout, Vout, Iout, On/Stby Status,
Inverter model/version, and Fault Condition (if exists)
•
Provides control capability: Remote On/Stby control of inverter
•
Provides pro-active Fault Alarm: Emails SRQ to user-specified email
address
•
Output Current, Iout
•
On/Stby Status
•
Inverter model/version
•
Fault Condition Query
Initial Setup
Introduction
To use the XDI Inverter Ethernet Interface Card, you must have the
following equipment:
•
A compatible model of inverter
•
CAT5/CAT5e patch cable if you want to connect over the network
•
Computer with Ethernet installed
•
Web browser program
The Ethernet interface is usually installed in the inverter at the factory.
Your local distributor or service center can also install the interface,
especially for use in a previously-purchased inverter already on site. The
Ethernet interface card will be configured with default settings (Table 4-
1).
Summary of Contents for XDI2048
