background image

Installation Guide

 14

©2002 Xantrex Technology Inc.   All Rights Reserved

P/N 973-0019-01-02 Rev A 06/2002

What does this warranty not cover?

This Limited Warranty does not cover normal wear and
tear of the product or costs related to the removal,
installation, or troubleshooting of the customer’s
electrical systems.  This warranty does not apply to and
Xantrex will not be responsible for any defect in or
damage to:

a)

the product if it has been misused, neglected,
improperly installed, physically damaged or altered,
either internally or externally, or damaged from
improper use or use in an unsuitable environment;

b)

the product if it has been subjected to fire, water,
generalized corrosion, biological infestations, or
input voltage that creates operating conditions
beyond the maximum or minimum limits listed in
the Xantrex product specifications including high
input voltage from generators and lightning strikes;

c)

the product if repairs have been done to it other than
by Xantrex or its authorized service centers
(hereafter “ASCs”);

d)

the product if it is used as a component part of a
product expressly warranted by another
manufacturer;

e)

the product if its original identification (trademark,
serial number) markings have been defaced,
altered, or removed.

Limited Warranty (continued)

NOTE: Fuses are NOT

covered under the
limited warranty.

Summary of Contents for TFB110





















Reviews: